This feature is not related to the above problems. Note: Reinitializing of Digital A/V video output of the player, which is performed when switching between the file browser and video playback (in the form of several second delay before playback start and return to the file browser) is an expected and normal player behavior with current firmware versions installed, it takes place with any Digital A/V output equipment. Color bars or other strange effects on screen.Problems with sound on a TV set (during sound transmission through Digital A/V output).Periodic warning on the TV/monitor/projector screen about video mode change during video playback or operation of the file browser.Periodical disappearing or jumping of picture during video playback or operation of the file browser.Digital A/V output connection is not available at all, although everything is properly connected and configured.This kind of troubles results from bad compatibility of the player with some models of Digital A/V output equipment. TROUBLE: Digital A/V output connection does not function or function improperly (picture disappears/ jumps, etc). SOLUTION: Please refer to the "Remote Control" section for proper operation of the remote control. TROUBLE: The remote control does not work or works improperly. Refer to the Quick Setting of Video Output Mode. If you are sure that the equipment is properly connected (using appropriate cable connected to appropriate sockets), try to adjust video output settings using the MODE button of your RC. SOLUTION: If during 60 sec after switching on there is still no picture on the screen, and the player power indicator is lighted, most probably the video output parameters of your player or video input of your TV/monitor/projector are incorrect. TROUBLE: The player turns on, but there is no picture. Wait at least 60 seconds before switching on the player. SOLUTION: Check if the player is connected to AC mains.
0 kommentar(er)
